© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Reset Box
License: CERN Open Hardware License
Mode: Editors' pick
This project responds to a direct command from an "Orange Pi" board (or similar) through the IO pins, allowing a physical reset, disconnecting the equipment for approximately 3 seconds from the power source and turning it back on after that.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 1N4148 | D1,D2,D3 | LL-34_L3.4-W1.5-RD | 3 |
2 | 12V | J1 | HDR-M-2.54_1X2 | 1 |
3 | HDR-M-2.54_1x3 | J2 | HDR-M-2.54_1X3 | 1 |
4 | SRA-12VDC-CL | K1,K2 | RELAY-TH_SRA-X-CX | 2 |
5 | LED | NO1 | LED-TH-3MM | 1 |
6 | 2N3904(TO-92) | Q1,Q2 | TO-92-3_L5.1-W4.1-P1.27-L | 2 |
7 | 10k | R1,R2 | R_AXIAL-0.3 | 2 |
8 | 220R | R3 | R_AXIAL-0.3 | 1 |
9 | SN7404N | U1 | PDIP-14_L19.3-W6.4-P2.54-LS7.9-BL-1 | 1 |
10 | LM78L05 | U2 | TO-92-3_L4.9-W3.7-P1.27-L | 1 |
11 | 1uF | U3 | CAP-TH_BD5.0-P2.00-D0.5-FD | 1 |
12 | JL500-50002G01 | U4,U5 | CONN-TH_2P-P5.08_JL500-50002G01 | 2 |
Unfold
Loading...
Do you need to add this project to the album?