© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD CH376-DUAL-USB-ISA-V2
Mode:
CAUTION! UNTESTED – WORK IN PROGRESS – UNDER CONSTRUCTION
ATF22v10 used as a memory address & I/O port decode
Supports 28 or 32 Pin devices for ROM
CH376 Modules Both layouts that I have found so far.
Mobules plug into the bottom of the board...
Jumper Selectable
USB1
@00E0 Data & @00E4 Command
or
@02C0 Data & @02C4 Command
USB2
@00E1 Data & @00E5 Command
or
@02C1 Data & @02C5 Command
ROM
Jumper Selectable
32K @C80000-CFFFF
or
32K @D80000-DFFFF
Jumper Selectable
28Pin - 28c256 / 28c512
or
32Pin - 39f010 / 39f030 / 39f040
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 0.1uF | C1,C2,C3 | C_DISC_D4.3MM_W1.9MM_P5.00MM | 3 |
2 | 100uF | C4 | CAP-ELEC-RAD-2.54MM | 1 |
3 | ISA 8-BIT EDGE CARD | E1 | ISA_BUS | 1 |
4 | ROM / USB | H1 | HDR-TH_6P-P2.54-V-R2-C3-S2.54_A2541WV-2X3P | 1 |
5 | FLASH | J1 | 2X6 | 1 |
6 | 10K | R1,R2,R3 | RES-TH_BD2.2-L6.5-P10.50-D0.9 | 3 |
7 | SST39F010 | U1 | DIP-32__600 | 1 |
8 | ATF22V10 | U2 | DIP-24__300 | 1 |
9 | SN74HCT245N | U3 | DIP-20__300 | 1 |
10 | 3x8pin | USB1,USB2 | N3X8PIN | 2 |
Unfold
Loading...
Do you need to add this project to the album?