© 2023 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD ESP32 Audio Board WalkieTalkie
License: Public Domain
I'm building a Walkie-Talkie based around the ESP32. This PCB wires together all the required modules and adds an independent supply to the microphone boards so you minimise noise when WiFi is being used.
You can use either an INMP-441 board or my microphone board (available from Tindie: https://www.tindie.com/products/21519/)
I made up this PCB as the wires to connect all the modules were getting quite untidy and I wanted to build in the power supply filtering.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ICS-43434 Breakout | U4 | ICS-43434 BREAKOUT BOARD | 1 |
2 | MAX98357 Adafruit Breakout | U5 | MAX98357A ADAFRUIT | 1 |
3 | 10m | L1 | IND-TH_BD10.0-P5.00-D0.7 | 1 |
4 | HDR-M-2.54_1x9 | GPIO,PWR | HDR-M-2.54_1X9 | 2 |
5 | 1u | C4,C3 | CAP-TH_L5.0-W2.5-P5.00-D1.0 | 2 |
6 | MCP1700-3302E/TO | U2 | TO-92-3_L5.1-W4.1-P1.27-L | 1 |
7 | INMP441 | U3 | INMP441 | 1 |
8 | 1000u | C1 | CAP-D10.0×F5.0 | 1 |
9 | TinyPICO | NO | TINYPICO | 1 |
Unfold
Loading...
Do you need to add this project to the album?