© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Speedometer v1.0 Home
The project started with an idea of make a homemade GPS speedometer using U-blox 6M and Arduino.
The main focus was to extract the components from those devices and combine them in one PCB that can be used professionally.
The below YouTube video shows a look into this project and how we will achive a similar results.
ID | Name | Designator | Footprint | Quantity | |
---|---|---|---|---|---|
1 | 10uF | C1,C4 | C1206 | 2 | C2935720 |
2 | 100nF | C2,C3,C5,C6,C7 | C0805 | 5 | C2234470 |
3 | 1uF | C8,C9 | 0805 | 2 | |
4 | 1N5817WS SJ | D1 | SOD-323_L1.7-W1.3-LS2.6-RD-1 | 1 | C2828424 |
5 | 2.54-1*6PHeader-RA | J1 | HDR-TH_6P-P2.54-H-M-W10.0 | 1 | C56816 |
6 | 1KΩ | R1,R5 | R0805 | 2 | C355162 |
7 | 1k | R4 | 0805 | 1 | |
8 | 10kΩ | R7 | R0805 | 1 | C355162 |
9 | Button | SW1 | SW-TH_4P-L6.0-W6.0-P4.50-LS6.1 | 1 | C71836 |
10 | DIPSWITCH_2PIN | SW2 | DIPSWITCH_2PIN | 1 | |
11 | ATMEGA328_TQFP | U1 | TQFP32 | 1 | C14877 |
12 | 1.3寸OLED显示屏12864 | U2 | OLED-TH12864 | 1 | C9900014198 |
13 | USB-TYPE-C-007 | U3 | TYPE-C-SMD_USB-TYPE-C-007 | 1 | C2927027 |
14 | LED0805 | U4 | LED0805-R-RD | 1 | C9900003975 |
15 | 24AA32A-I/SN | U6 | 24AA32A-I/SN | 1 | |
16 | NEO-6M | U7 | NEO-6 | 1 | |
17 | ML414H-IV01E | U8 | BAT-SMD_ML414H-IV01E | 1 | C167511 |
18 | 4A2D | VR | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | 1 | C2832127 |
19 | 16MHz | Y1 | 3213 | 1 | C32180 |
20 | GPS_CHIP_ANTENNAW3011 | Y4 | W3011 | 1 |
Unfold
Loading...
Do you need to add this project to the album?