OngoingRC Servo CNC I/O Module
STDRC Servo CNC I/O Module
License
：GPL 3.0
Description
### Features
- 4 Standard RC Servos
- Switch to select servo power from the 6 Pack 5V supply to an external supply (on terminal block).
### Buying assembled from JLCPCB
They will only assemble one side. You should specifiy the top side. You must purchase and solder the 12 pin header on the bottom. It is a standard 0.100" (2.54mm) pitch header. You can buy snap off style many places or the exact part here. LCSC part number C225487
You also need to buy the mating terminal block (Ningbo Xinlaiya Elec. XY2500F-A-5.0-2P) from LCSC
Both those parts are on the BOM of the schematic.
### PCB Specs
You can use all of the defaults. I typically change the solder mask to black for 6 Pack modules.
Material:FR4
Layers: 2
Thickness: 1.6mm
Copper Weight: 1oz
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment