4x Basic Input Module (6 Pack)

This is a 4 channel input module for the 6 Pack controller. I has opto isolation, but does not use an isolated power supply to keep the cost down. It is typically used for mechanical switch inputs, but can be used for things like proximity switches as long as they switch to ground (NPN Type)

Features

- 4 Inputs
- +5V on one terminal
- VMot (Motor voltage) on one terminal
- Opto Isolation
- RC/ Filter 

Buying assembled from JLCPCB

They will only assemble one side. You should specifiy the top side. You must purchase and solder the 12 pin header on the bottom. It is a standard 0.100" (2.54mm) pitch header. You can buy snap off style many places or the exact part here. LCSC part number C225487

You also need to buy the mating terminal block (Cixi Kefa Elec KF2EDGK-2.54-10P) from LCSC

Both those parts are on the BOM of the schematic.

PCB Specs

You can use all of the defaults. I typically change the solder mask to black for 6 Pack modules.

Material:FR4
Layers: 2
Thickness: 1.6mm
Copper Weight: 1oz

How to order

Here is a video on how to order.