© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionVariable power supply with LM 317
License: GPL 3.0
The circuit described in this page represents a variable power supply based on the integrated LM 317, the PCB measures 28x47 mm. Once assembled, all the only calibration required will be to change the value of Trimmer P1 until the desired value is obtained. In case the integrated unit should heat up, a cooling fin must be installed. For more information
variable power supply with lm317
Open in editorvariable power supply with lm317 - pcb
Open in editorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | LM317 | IC1 | 317TS | 1 |
2 | 5k | P1 | B25P | 1 |
3 | 1k | R2 | R1/4W | 1 |
4 | 220 | R1 | R1/4W | 1 |
5 | 1N4007 | D1,D2 | DO41-10 | 2 |
6 | 100uF | C4,C1 | E2-5 | 2 |
7 | 100nF | C2 | C2.5-2 | 1 |
8 | 10uF | C3 | E2-5 | 1 |
9 | IN | J1 | MORSETTIERA | 1 |
10 | OUT | J2 | MORSETTIERA | 1 |
Unfold