© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD ArduinoISP Programmer
License: GPL 3.0
Mode: Editors' pick
- 0
Update time：
2022-06-09 04:59:40
Creation time：
2018-10-27 03:55:45
Description
Arduino as ISP proframmer for ATTiny micro controllers using Atmel AT328P micro controller chip. The PCB is single layered and designed for a home etching.
I could not found the smaller Ziff socket so used 40 pin one as zig for attinys.
I have tested the programmer for AtTiny 85/45/13and it work like a charm.
Please feel free to copy and modify as per your need.
Note: PCB version#3 is the most updated and that I used for the final PCB. The track width is 30 and spaceing is 20.
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 10uF | C1,C4 | CAP-D6.3XF2.5 | 2 |
| 2 | 22pF | C2,C3 | RAD-0.1 | 2 |
| 3 | 1600Mhz | CXT | HC-49S | 1 |
| 4 | USB to Serial | JP1 | FTDI_BASIC | 1 |
| 5 | HeartBeat | LED1 | LED-3MM/2.54 | 1 |
| 6 | Error | LED2 | LED-3MM/2.54 | 1 |
| 7 | Programming | LED3 | LED-3MM/2.54 | 1 |
| 8 | 220 | R1,R2,R3 | AXIAL-0.3 | 3 |
| 9 | 10K | R4 | AXIAL-0.3 | 1 |
| 10 | 328PU | U1 | DIP-28_300MIL | 1 |
| 11 | ZIFSOCKET-40-6DIL40-6-ZIF_SOCKET | U2 | DIL40-6-ZIF_SOCKET | 1 |
Unfold
Project Members
0
0
Collect to album
Target complaint
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?