© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD ATmega328 + NRF + Si7021
License: Public Domain
Mode: Editors' pick
Simple ATmega328 board with NRF24L01+, FTDI and Si7021 temperature/humidity sensor connector.
Designed to run at 3.3V/8MHz, powered by 3 x AA batteries
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | FTDI Header | FTDI1 | HDR-F-2.54_1X6 | 1 |
2 | 3x6x2.5mm | KEY1 | KEY-3.0*6.0 | 1 |
3 | MCP1700T-3302E/TT | MCP1700 | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | 1 |
4 | solder pad jumper 3 way | U4,U2 | SOLDER PAD JUMPER 3 WAY | 2 |
5 | 10uF | C8 | CASE-A_3216 | 1 |
6 | HDR-M-2.54_1x2 | J1 | HDR-M-2.54_1X2 | 1 |
7 | Header-Female-2.54_1x4 | BME280 | HDR-4X1/2.54 | 1 |
8 | solder pad x 1 | RST,A3,A2,GND | SOLDER PAD X 1 | 4 |
9 | Header-Male-2.54_2x4 | NRF24L01+ | HDR-TH_8P-P2.54-V-R2-C4-S2.54 | 1 |
10 | 100n | C4,C7,C5,C3 | C0603 | 4 |
11 | 10k | R1 | R0805 | 1 |
12 | 4.7k | R2,R3 | R0805 | 2 |
13 | ATMEGA328P-AU | U1 | TQFP-32_L7.0-W7.0-P0.80-LS9.0-BL | 1 |
14 | 1u | C1,C2 | C0805 | 2 |
Unfold
Loading...
Do you need to add this project to the album?