© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std edition STM32 MiniPill LoRa v1.2
Profile：STM32 Low Power LoRa development board
License: CC-BY-NC-SA 3.0
Description
Universal useable MiniPill with LoRa capability
Using STM32L051C8T6 chip
Version 1.2: R2 to GND instead of VCC
for more information visit [https://www.iot-lab.org/blog/370/](https://www.iot-lab.org/blog/370/)
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
Empty
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 100nF | C1,C2,C3,C4,C5,C7 | C0603 | 6 |
| 2 | 10uF | C6 | C0805 | 1 |
| 3 | STLINK connector | P1 | HDR-6X1/2.54 | 1 |
| 4 | Header-Female-2.0_1x12 | P2,P3 | HDR-12X1/2.0 | 2 |
| 5 | BME280 sensor | P4 | HDR-6X1/2.54 | 1 |
| 6 | 100K | R1,R2 | R0603 | 2 |
| 7 | IPEX-4 | RF1 | IPEX-SMD_4P-L1.8-W1.7-LS2.0 | 1 |
| 8 | STM32L051C8T6 | U1 | LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | 1 |
| 9 | HOPERF RFM95 | U2 | HOPERF RMF95/96/97/98W | 1 |
| 10 | 20p | C8,C9 | 0603 | 2 |
| 11 | 10p | C10,C11 | 0603 | 2 |
| 12 | 1M | R4 | 0603 | 1 |
| 13 | 8MHz | X1 | OSC-SMD_4P-L5.0-W3.2-BL | 1 |
| 14 | 32.768KHz | X2 | OSC-SMD_L3.2-W1.5-L | 1 |
Unfold
Project Members
8
20
Collect to album
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?