© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionArduino Wi-Fi Shield using ESP8266
This is an Arduino WiFi shield using ESP8266 which sits snug on top of the Arduino UNO board. This board can be programmed using:
This shield can be used to build any IoT based project using Arduino Uno.
For complete details, please visit this Arduino WiFi Shield DIY Tutorial
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ARDUINO_R3_SHIELD | J1 | UNO_R3_SHIELD | 1 |
2 | ESP8266 | U1 | ESP8266 | 1 |
3 | DC JACK | IN_+12V | DC JACK (123) | 1 |
4 | LM317TG | 3.3V_REGULATOR | TO-220(TO-220-3) | 1 |
5 | 220R | R1 | AXIAL-0.3 | 1 |
6 | 360R | R2 | AXIAL-0.3 | 1 |
7 | GPIO pinout | H1 | HDR-2X1/2.54 | 1 |
8 | Mode select | P1 | HDR-3X1/2.54 | 1 |
9 | FTDI module | P2 | HDR-6X1/2.54 | 1 |
10 | Push Button | ESP_RST | TACTILE-PTH | 1 |
11 | LCD | U4 | LCD | 1 |
12 | 1k | R8 | AXIAL-0.3 | 1 |
13 | 10k | R9 | TRIMPOT | 1 |
14 | Header-Female-2.54_1x8 | P3 | HDR-8X1/2.54 | 1 |
15 | Header-Female-2.54_1x10 | P4 | HDR-10X1/2.54 | 1 |
16 | Header-Male-2.54_1x6 | P5 | HDR-6X1/2.54 | 1 |
17 | Header-Male-2.54_1x8 | H2 | 210S-1X8P | 1 |
Unfold