© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std Edition7.4V Lithium Battery Charger Circuit
License: GPL 3.0
In this project we will build a Two Stage Lithium Battery charger (CC and CV) that could be used as to charge Lithium ion or lithium polymer batters. The battery charger circuit is designed for 7.4V lithium battery pack (two 18650 in Series) but the circuit can be easily modified to fit in lower or slightly higher battery Packs like to build 3.7 lithium battery charger or 12v lithium ion battery Charger.
It is using LM317 and Arduino, charge current 800mA (CC) and charge voltage 8.4 (CV).
For the complete circuit and pcb design tutorial, visit circuitdigest.com
ID | Name | Designator | Footprint | Quantity | Mounted | |
---|---|---|---|---|---|---|
1 | LM317TG | CONSTANT_CURRENT,CONSTANT_VOLTAGE | TO-220(TO-220-3) | 2 | Yes | C89320 |
2 | 1.5R 1W | R1 | 10W | 1 | Yes | |
3 | 3.3k | R3 | AXIAL-0.3 | 1 | Yes | |
4 | 560R | R2 | AXIAL 0.3/0.8/1.5 | 1 | Yes | |
5 | spdt 12v relay | U5,U1 | 5 PIN SPDT RELAY | 2 | Yes | |
6 | DC JACK | IN_+12V | DC JACK (123) | 1 | Yes | |
7 | 1N4007 | D2,D1 | DO-41 | 2 | Yes | |
8 | BC547B Tube | Q1,Q2 | TO-92(TO-92-3) | 2 | Yes | C2092 |
9 | 1k | R5,R4,R8 | AXIAL-0.3 | 3 | Yes | |
10 | Battery_terminal | P1 | HDR-1X2/2.54 | 1 | Yes | C49661 |
11 | 1M | R6,R7 | AXIAL-0.3 | 2 | Yes | |
12 | 2.2R 5W | SHUNT | 1W | 1 | Yes | |
13 | NO | U3 | ARDUINO_NANO | 1 | Yes | |
14 | 10uf | C1 | CAP-D3.0XF1.5 | 1 | Yes | |
15 | LCD | U4 | LCD | 1 | Yes | |
16 | 10k | R9 | TRIMPOT | 1 | Yes | C125022 |
Unfold