Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
JLCPCB: 5A Linear Stabilized Voltage Supply Module
JLCPCB: 5A Linear Stabilized Voltage Supply Module
Project tags
License
License:
Mode:
Mode
Editors' pick
Editors' pick
554
0
0
0
Update time:
2020-06-13 06:37:51
Creation time:
2020-06-13 06:36:50
Description
Description
[JLCPCB](JLCPCB): 5A Linear Stabilized Voltage Supply Module
When we are doing experiments or DIY, this module can be used to power various modules, especially high-current devices such as motors and steering gear. This module can give up to 5A current.
![homepage.jpeg](//image.easyeda.com/pullimage/xFk49LR35o90wz2FMSK2fA4Xk98r7DMYxomGwyMm.jpeg)
Specification
1 This module USES 4 LDO as main chips to achieve 6V ~ 12V buck, and the output voltage can be VCC, 5V, 3V3. There are 17 sets of 5V and 3V3, and if that's not enough, you can use extension ports to add output ports.
2 Power line width : 35um: 1.5mm-3.2a current 2mm-4a current 50um: 1.5mm-3.5a current 2mm-4.3a Current 70um: 1.5mm-4.2a Current 2mm-5.1a Current so: the total power line width should be 2mm
3 The 470uF electrolytic capacitor shall be the current outlet 4. P4(4*4*4Pin). All welding pads shall be changed to 1.3mm 5, U3 and U4 internal connecting pins of the two chips
![SCHEMATIC.png](//image.easyeda.com/pullimage/ZywKpa1O804cHDbfU6MTS1Gpb5DWdoVbqdZ5qjVb.png)
PCB File
The PCB samples were made by [JLCPCB](JLCPCB) with $2
PCB updated that P2: 1 pin height changed to 2.2mm and 2 pin height changed to 2.2mm
The 470uF electrolytic capacitor shall be the current outlet 4. P4(4*4*4Pin). All welding pads shall be changed to 1.3mm 5, U3 and U4 internal connecting pins of the two chips
![pcb.png](//image.easyeda.com/pullimage/apHSFTtyKE6ta2P18pUzcctSyj3mNNQlBTdEkOyp.png)
Design Drawing
Design Drawing
schematic diagram
(
1
/
)
PCB
(
1
/
)
The preview image was not generated, please save it again in the
editor.
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to catherinealson
Delete
Comment
Are you sure to delete the comment?
Report
JLCPCB: 5A Linear Stabilized Voltage Supply Module
No Profile
Announcer: CatherineAlson
Creation time: 2020-06-13 06:36:50
Published time:
2020-06-13 06:37:51
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal