© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD FlederCamV3
Mode:
The PCB is meant to directly mount ontop of a Raspberry Pi and should work with all B Models after B+, but was created with the Raspberry Pi 3 in mind. Most connections to other hardware are made using Pinheaders to allow easy adding, removing and switching of components.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 1x2 Header | POWER_IN2,IR-LED_POWER2,IR-LED_POWER1,POWER_IN3,POWER_IN1,IR-LED | HDR-TH_2P-P2.54-V-M | 6 |
2 | 1x4 Header | SCREEN | HDR-4X1/2.54 | 1 |
3 | 1x10 Header | ADC | HDR-TH_10P-P2.54-V-F | 1 |
4 | Header-Female-2.54_2x20 | GPIO | HDR-TH_40P-P2.54-V-R2-C20-S2.54 | 1 |
5 | 2x4 Header | 2.5V_PULL-UP | HDR-TH_8P-P2.54-V-F-R2-C4-S2.54 | 1 |
6 | IRFZ44NPBF | Q1,Q2,Q3 | TO-220-3_L10.0-W4.5-P2.54-L | 3 |
7 | 1x5 Header | ADC-IN | HDR-F-2.54_1X5 | 1 |
8 | 1x5 Header | BUTTONS | HDR-TH_5P-P2.54-V | 1 |
9 | LED-TH-5mm_R | LED2 | LED-TH_BD5.0_RED | 1 |
10 | 1x7 Header | LED-DRIVER | 1X8 PIN HEADER 2.54MM | 1 |
11 | 1x8 Header | BONUS | HDR-TH_8P-P2.54-V | 1 |
12 | 2.2k | R3,R4,R5,R6,R7,R8 | R0603 | 6 |
13 | 180 | R9,R10 | R0603 | 2 |
14 | 10k | R11,R12,R13 | R0603 | 3 |
15 | 330 | R1,R2 | R0603 | 2 |
16 | LED-TH-5mm_G | LED1 | LED-TH_BD5.0_GREEN | 1 |
17 | 1x6 Header | RTC | HDR-TH_6P-P2.54-V-F | 1 |
18 | HDR-F-2.54_1x2 | H1 | HDR-F-2.54_1X2 | 1 |
19 | 2N3904(TO-92) | Q4,Q5 | TO-92-3_L5.1-W4.1-P1.27-L | 2 |
20 | 1k | R14 | R0603 | 1 |
21 | 620 | R15 | R0603 | 1 |
Unfold
Loading...
Do you need to add this project to the album?