© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionAF7KR Step Attenuator
License: CC-BY 3.0
Description
Poor ham's step attenuator using 0.1" jumpers as switches. I glued together 2 jumpers with superglue. Resistor values are from E24 5% row.
Update 10-14-2019: Built 3 boards. There is no significant feedthrough up to 2GHz. Attenuation flatness is ok up to about 400-500MHz, then inductance of the "loops" formed by the jumpers and resistors causes significant excess attenuation.
Documents
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | CONREVSMA009 | J1,J2 | CON-SMA-EDGE | 2 |
| 2 | Header-Male-2.54_2x2 | P1,P2,P3,P4,P5,P6,P7,P8 | HDR-TH_4PIN-V-ROW2-COL2-MALE-PITCH2.54 | 8 |
| 3 | 62 | R1,R3,R4,R6,R7,R9 | 1206 | 6 |
| 4 | 240 | R2,R5,R8 | 1206 | 3 |
| 5 | 100 | R10,R12,R13,R15 | 1206 | 4 |
| 6 | 68 | R11,R14 | 1206 | 2 |
| 7 | 180 | R16,R18 | 1206 | 2 |
| 8 | 30 | R17 | 1206 | 1 |
| 9 | 300 | R19,R21 | 1206 | 2 |
| 10 | 18 | R20 | 1206 | 1 |
| 11 | 910 | R22,R24 | 1206 | 2 |
| 12 | 5.6 | R23 | 1206 | 1 |
Unfold
Project Members