© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Z80 Single Board Computer
License: TAPR Open Hardware License
Mode: Editors' pick
Single board computer based on Grant Searle's Minimal chip count Z80 computer (32K RAM version).
See https://github.com/jefftranter/Z80/tree/master/sbc
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 0.1uF | C1,C2,C3,C4,C5,C6 | RAD-0.1 | 6 |
2 | 10uF | C7 | RAD-0.1 | 1 |
3 | 22pF | C8,C9 | RAD-0.2 | 2 |
4 | POWER | D1 | LED-TH_BD3.0-P2.54-RD | 1 |
5 | FTDI | H1 | HEADER 1X6 | 1 |
6 | USB POWER | J1 | 1X2 PIN HEADER 2.54MM | 1 |
7 | Header-Male-2.54_2x18 | P1 | HEADER-MALE-2.54_2X18 | 1 |
8 | 2K2 | R1 | R_AXIAL-0.3 | 1 |
9 | 1M | R2 | R_AXIAL-0.3 | 1 |
10 | 1K | R3 | R_AXIAL-0.3 | 1 |
11 | 3K3 | R4,R5 | R_AXIAL-0.3 | 2 |
12 | 330 | R6 | R_AXIAL-0.3 | 1 |
13 | RESET | SW1 | TACTILE-PTH-EZ | 1 |
14 | Z80 | U2 | DIP40 | 1 |
15 | 68B50 | U3 | DIP-24_600MIL | 1 |
16 | 62256 | U4 | DIP28-600 | 1 |
17 | 27C64 | U6 | DIP28-600 | 1 |
18 | 7.3278 MHz | X1 | HC-49S | 1 |
19 | 74HCT04 | U5 | DIP14 | 1 |
20 | 74LS32 | U7 | DIP14 | 1 |
Unfold
Loading...
Do you need to add this project to the album?