NiMH SLIME_v2p

SlimeVR Tracker driven by one NiMH battery. 

Parts on the top layer are available in JLCPCB's PCBA (as of Oct, 2024).

Parts on the bottom layer (intended for hand soldering) are as follows:

• Seeed Studio XIAO ESP32C6
• SlimeVR BNO085 module (or another I2C pin-compatible module, such as GY-521)
• Tact switch (6mm x 6mm, such as BS3F)
• battery box. (should be connected to B+/B- pad), AA(long operation time) or AAA(small size) 

This PCB cannot charge the NiMH battery.

The tact switch is for power on/off by long push. It and ESP32C6 requires modified firmware of SlimeVR.

(Github URL https://github.com/tbbsakura/SlimeVR-Tracker-ESP_XIAO-C6_NiMH)