© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Dual ADSR
Mode:
Dual ADSR module for +/-15V modular synthesizer, with PCB-mounted potentiometers. Gives two separate ADSR envelope generators, based on YuSynth design: https://yusynth.net
Two independent sets of controls, both can be additionally configured via jumpers for slow (5ms to 10s) and fast (1ms to 1s) times on Attack, Decay and Release. Note: both jumpers should be set uniformly (both slow or both fast) in a single channel. Channels have separate jumpers, so one can be fast and one can be slow.
When switching jack is used for Input 2, it can be wired so that Input 1 is present when no patch cord is inserted into Input 2.
PCB_Dual ADSR
Open in EditorPCB_Dual ADSR new
Open in EditorPCB_Dual ADSR_v3
Open in EditorFrontpanel
Open in EditorID | Name | Designator | Footprint | Quantity | |
---|---|---|---|---|---|
1 | PAD | PAD29 | PAD_PAD25 | 1 | |
2 | PAD | PAD24,PAD23,PAD22,PAD21,PAD20,PAD19,PAD18,PAD17 | PAD_PAD17 | 8 | |
3 | PAD | PAD16,PAD14,PAD12,PAD9 | PAD_PAD9 | 4 | |
4 | PAD | PAD4,PAD3 | PAD | 2 |
Unfold
Loading...
Do you need to add this project to the album?