© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD SC701 v1.0 RCBus Backplane
Mode:
RCBus backplane section: 5 volt input, 6 vertical sockets 80-pin, 1 horizontal socket 80-pin, 0.6" spacing
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 100nF | C1,C2,C3,C4,C5,C6 | CAP-RAD-2.54MM | 6 |
2 | 100uF | C7 | CAP-ELEC-RAD-2.54MM | 1 |
3 | 1nF | C8 | CAP-RAD-2.54MM | 1 |
4 | POWER | J1 | DC_BARREL_JACK_PTH_SLOT_HOLE | 1 |
5 | POWER | J2 | SCREW-TERMINAL-X2 | 1 |
6 | Enable | JP0 | HDR-1X02-S-M-2.54MM | 1 |
7 | Jumper_3x2 | JP1,JP3,JP5,JP6,JP7,JP8,JP9,JP10 | HDR-2X03-S-M-2.54MM | 8 |
8 | Jumper_5x2 | JP2,JP4 | HDR-2X05-S-M-2.54MM | 2 |
9 | RCBus Card Socket | K1,K2,K3,K4,K5,K6 | RC2014-HDR-2X40-S-F-R-2.54MM | 6 |
10 | POWER | LED1 | LED-3MM/2.54 | 1 |
11 | RESET | P1 | HDR-1X02-A-M-2.54MM | 1 |
12 | 1k | R1 | AXIAL-0.3 | 1 |
13 | 10k | R2 | AXIAL-0.3 | 1 |
14 | RCBus Section Socket | S1 | BP80-SOCKET | 1 |
15 | ON/OFF | SW1 | SPDT_TOGGLE_SWITCH | 1 |
16 | RESET | SW2 | TACTILE-PTH-SW | 1 |
17 | DS1233-5+ | U1 | TO92 WIDE | 1 |
Unfold
Loading...
Do you need to add this project to the album?