trigger_device

Ongoing

STD trigger_device

License: Public Domain

Mode:

Editors' pick

Update time： 2018-12-11 18:10:21

Creation time： 2018-11-11 11:52:42

Description

The purpose is to use a GPS (or other device )PPS to generate as output a triggering signal. This signal will trigger at a given frequence given by a potentiometer and based on the PPS signal.

Design Drawing

schematic diagram

（ 1 / ）

Sheet_1
Open in Editor

PCB

（ 1 / ）

trigger_device_PCB_2.0
Open in Editor
trigger_device_PCB_3.0
Open in Editor
trigger_device_PCB_4.0
Open in Editor
trigger_device_PCB_5.0
Open in Editor
trigger_device_PCB_6.0
Open in Editor
trigger_device_PCB_7.0
Open in Editor
trigger_device_PCB_8.0
Open in Editor
trigger_device_PCB_9.0
Open in Editor

The preview image was not generated, please save it again in the editor.

BOM

BOM download Purchase Parts

ID	Name	Designator	Footprint	Quantity	Mounted
1	ARDUINO_NANO	U1	ARDUINO_NANO	1	Yes
2	LCD 16x2 Arduino	U2	LCD 16X2 ARDUINO	1	Yes
3	SW_Push	SW1	PUSH BUTTON	1	Yes
4	RTRIM-3362P	U3,U4	RTRIM3362P	2	Yes
5	BNC	U5	BNC	1	Yes
6	2k	R1	AXIAL-0.3	1	Yes
7	BORNIER 2	J1	BORNIER_2_3.5	1	Yes	1725656
8	WIGO24_254	X1	WAGO24-254	1	Yes
9	22uF	C1	CAP-CBB-6.5*4.0	1	Yes