© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD IR Sensor & 5V Relay
Mode: Editors' pick
This IR motion sensor relay switch circuit is designed for use with all kinds of medium-power automobile/domestic 5V DC loads. It is a simple solid-state relay (SSR) switch, controlled by a standard passive infrared (PIR) motion sensor module. A PIR sensor is an electronic device that can measure IR light radiating from objects in its field-of-view.
Circuit diagram of the IR motion sensor relay switch is, its built around a PIR motion sensor, BC547 (T1) and IRF9540 (T2), rectifier diode 1N4007 (D1) and a few other components.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 10K | R3 | RES-ADJ_3386P | 1 |
2 | photodiode | D1 | LED 5MM TH | 1 |
3 | CONN-2P(5mm) | P1 | CONN-TH_2P-P5.00 | 1 |
4 | IR | LED3 | LED2-2.54-D5.0MM | 1 |
5 | 1K | R1,R6,R5 | RESISTOR 1K | 3 |
6 | 330 | R2 | RESISTOR 1K | 1 |
7 | 10K | R4 | RESISTOR 1K | 1 |
8 | 1N4007 | D2 | DO-41 | 1 |
9 | screw_terminal_block | J2 | 1935174 | 1 |
10 | LED | LED1,LED4,LED2 | LED2X5 | 3 |
11 | CONN-DC(M) | J1 | DC_BARREL_JACK_PTH_2MM | 1 |
12 | BC547B | Q1 | TO92-INLINE | 1 |
13 | 1 uF | C1 | CAP-15 | 1 |
14 | 1uF | C2 | CAP-15 | 1 |
15 | 7812 | U1 | 7812/7912 | 1 |
16 | RELAY | U4 | RELAY-JZC | 1 |
17 | LM358 | U2 | DIP08 | 1 |
Unfold
Loading...
Do you need to add this project to the album?