Ongoing2024.10.0 - ESPHome - AXA Remote 2.0
STD2024.10.0 - ESPHome - AXA Remote 2.0
License
：CC0 1.0
Description
PCB to control AXA Remote 2.0 via ESPHome and Home Assistant. Based on the original work of galagaking.
This module will connect the AXA Remote 2.0 with your Home Assistant Server using ESPHome. The module will integrate in Home Assistant, showing the position of your Window (open or closed), and give you the possibility to open and close the window from there. The remote control will still work, the status of the window will synchronize with home assistant.
For ESPHome config see.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment