Sheet 2 CRE

To design the PCB layout, the IPC Standards (1) were reviewed, and the calculations resulted in a trace width of 49 mil, with a board thickness of 8oz/ft^2, for a current of 10 amps in each circuit. With these constraints the components were placed in possible routes for the trace. After 2 iterations, the schematic seen in Figure 3 was accomplished. Afterwards the  layout was routed to accommodate a left terminal for the FuelTech and a right terminal for the pumps. The final CAD product  has dimensions of 6.06 x 3.22 inches. The software used to create this design includes a function called DCR that allows the creator to verify whether the design complies with the minimum requirements previously established, reducing the number of errors possible.