© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD GSM-based-Atmega32
Mode:
Schematic_Common_Anode
Open in EditorGSM_Atmega32_new
Open in EditorGSM_Atmega32_V2
Open in EditorGSM_Atmega32_V3
Open in EditorGSM_Atmega32_V4
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 16MHz | Y1 | HC49US | 1 |
2 | GSM Module | CN1(MALE) | CONNECTOR5P | 1 |
3 | ULN2003APG | U20,U21 | DIP-16 | 2 |
4 | 1K | R9,R3,R4,R5,R6,R7,R8,R10,R11,R12 | 0805 | 10 |
5 | BD140 | Q1,Q2,Q3,Q4,Q5,Q6,Q7,Q8,Q9,Q10 | TO-126 | 10 |
6 | Power Conn | P1,P6 | XHB-2A | 2 |
7 | 6A2-T | IN4007 | DIODE_DO-201AD_HORIZONTAL_RM15 | 1 |
8 | 7805 (3A) | U27 | TO252 | 1 |
9 | 470uF/40V | C4 | CAP-D4.0XF1.5 | 1 |
10 | 0.1uF | C5(CERAMIC),C7(CERAMIC),C3(CERAMIC) | CAP-CBB-6.5*4.0 | 3 |
11 | POWER_LED | U28,U22 | LED5 | 2 |
12 | 270 | R19,R21,R22,R23,R1,R2,R20,R15,R13 | AXIAL-0.3 | 9 |
13 | 10uH | L1 | L-10UH | 1 |
14 | 22pF | C2(CERAMIC),C1(CERAMIC) | RAD-0.2 | 2 |
15 | LED1 | RED,YEL,GRN | LED-1206 | 3 |
16 | 1uF/63V | C1,C6 | CAP-D4.0XF1.5 | 2 |
17 | 13 PIN Chinese Female Conn | P2 | KF2510-16A | 1 |
18 | BC547BTA | Q11 | TO-92-3L | 1 |
19 | GMD12095YB-24V2400 | BUZZER | BUZZER-R6.0-2P-7.6MM | 1 |
20 | RESET SWITCH | KEY1,KEY2 | KEY-3.0*4.0 | 2 |
21 | Temp Sensor Male Connector | P4,P3 | HDR-3X1/2.54 | 2 |
22 | SW1 | KEY5,KEY3 | KEY-3.0*4.0 | 2 |
23 | SW2 | KEY6,KEY4 | KEY-3.0*4.0 | 2 |
24 | Buzzer Male Connector | P5 | XHB-2A | 1 |
25 | Programmer Connector - 6 PIN | MALE | CONNECTOR7P | 1 |
26 | ATMEGA328P-PU | U10 | DIP-28_300MIL | 1 |
27 | 7SEGMENTLED-COMMONANODE_HDSM531_SMD_16SEP2013 | U6,U7,U8,U9,U12,U13,U14,U15,U16,U17,U18,U19,U23,U24 | 14 | |
28 | 74HC595 | U2,U3 | NONE | 2 |
29 | 1X5 Male Connector | CN2 | CONNECTOR5P | 1 |
30 | 1x7 Male Connector | CN3 | CONNECTOR7P | 1 |
31 | ATMEGA16/32 | U1 | DIL40 | 1 |
32 | 5-pin | (MALE) | CONNECTOR5P | 1 |
33 | 425CONNECTORS- -05P-2.5MMWHITE GREY | CN2(MALE),CN3(MALE) | CONNECTOR5P | 2 |
34 | Male-Conn | JP1 | HDR-2P*4P | 1 |
35 | 7805 | U27 | TO252 | 1 |
36 | 2X3 LED-Male-Conn | JP2 | HDR-2P*4P | 1 |
37 | ATMEGA16A/32A | U5 | DIL40 | 1 |
38 | 1K POT | R14 | POTENTIOMETER_TRIMMER_BOURNS_3266P | 1 |
39 | LM350T | U11 | TO-220(TO-220-3) | 1 |
40 | 120 Ohm | R16 | AXIAL-0.3 | 1 |
41 | ? | R17 | AXIAL-0.3 | 1 |
42 | 0.1uF | C4(CERAMIC),C6(CERAMIC) | RAD-0.1 | 2 |
43 | 100u/25V | C2,C3 | CAP-D3.0XF1.5 | 2 |
44 | ATMEGA32A-AU: TQFP | U4 | TQFP-44_10X10X08P | 1 |
Unfold
Loading...
Do you need to add this project to the album?