PiBot FluidNC GRBL CNC Controller V4.8A

This is an advanced CNC controller designed to run FluidNC firmware on ESP32. This controller is designed to control a wide variety of of CNC designs. It can handle up to 6 motors for 6 axis machines or motors on any axis for machines like XYYZ and XXYYZ type motor arrangements. The firmware never needs to be compiled and can be uploaded and configured and controlled from a web browser.

This is a CNC controller for use with an ESP32 and FluidNC firmware. 

More detail： https://www.pibot.com/

Get：https://www.pibot.com/pibot-fluidnc-grbl-cnc-controller-v4-8

Features

• • Integrated ESP32 (Programmed with FluidNC. Includes a generic configuration)
  • (6) Motor connectors for external stepper drivers (5v signals). Each motor has separate step, direction and enable signals. 
  • Inputs for switches (limits, probes, control, etc)
  • Communication Mode: USB Cable or Blue Tooth or WIFI
  • Spindles (many types supported). Some multi-spindle arrangements are possible like RS485 & laser on the same machine.
  • 0-10V controlled spindles with additional forward and reverse direction signals
  • PWM Speed controllers with optional separate enable signals
  • Relay (on/off) controlled spindles.
  • BESC (Brushless Motor) based spindles
  • Lasers with PWM and enable
  • Unused spindle 5V outputs can be used for any output function (coolant, etc)
  • Micro SD card socket for local storage of gcode files
  • Module socket for GPIO extenders and Pendant interfaces.
  • Compatible with PiBot Stepper Motor Driver Rev2.3 TOSHIBA TB6600 (3.3V 5V or Dgnd logic max Output 4.12 - 4.5A)
  • Compatible with PiBot Isolated Relay Board Rev2.3