© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionAdjustable power supply by the Arduino
Profile:power supply
License: GPL 3.0
Данный проект не является разработкой Регулируемого блока с нуля, а лишь дополнением к блоку (от ноутбука), для регулировки его напряжения под нужные задачи
Sheet_1
Open in editorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 0.1u | C1,C2,C3,C4,C5,C6,C7,C9,C11,C12,C13,C15,C16 | C0603 | 13 |
2 | 1000u | C8,C14 | CASE-A_3216 | 2 |
3 | 0.47u | C10 | C0603 | 1 |
4 | 1N4007 DIODE COPY | D2 | DIODE 1N40001 | 1 |
5 | FUSEGLASS | F1 | F2-22.5-D2.3XL22.6MM | 1 |
6 | HDR-M-2.54_1x1 | J1,J2 | HDR-M-2.54_1X1 | 2 |
7 | K2-3.6×6.1_SMD | KEY1,KEY2,KEY3 | KEY-SMD_2P-L6.2-W3.6-LS8.0 | 3 |
8 | PC817C | PH1 | PC817C | 1 |
9 | IRF630 | Q1 | TO-220 | 1 |
10 | BC327-25ZL1G | Q2 | ONSC-TO-92-3-29-11_AM_BL | 1 |
11 | IRFZ46N | Q3 | TO-220AB | 1 |
12 | 100 Ohm | R1,R12 | R0603 | 2 |
13 | 1 Ohm | R2 | R0603 | 1 |
14 | 3k Ohm | R3 | R0603 | 1 |
15 | 1k | R4,R5 | R0603 | 2 |
16 | 10k | R6 | R0603 | 1 |
17 | 100k | R7 | R0603 | 1 |
18 | 500 Ohm | R8 | R0603 | 1 |
19 | 10 kOhm | R9,R10 | R0603 | 2 |
20 | 10 Ohm | R11 | R0603 | 1 |
21 | 0 | R13,R14 | R0603 | 2 |
22 | ATmega328P-PU | U1 | DIP28 | 1 |
23 | TL431CLPMTL431CLPM | U2 | TO-92-3_L4.9-W3.7-P1.27-L | 1 |
24 | OLED 128x32 I2C | U3 | OLED 128X32 I2C | 1 |
25 | LM317LILP | U4 | TO-92-3_L4.8-W3.7-P1.27-L | 1 |
26 | LM393PWRG3 | U5 | TSSOP-8 | 1 |
27 | ABL-8.000MHZ-B1U | Y1 | HC/49US_(AT49)PTH | 1 |
Unfold