© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Reflow Hot-Plate_ProMini
Mode:
I really liked the Reflow Hot Plat project of AfterEarthLTD and also the safety features and all the stuff implemented by DerSpatz but i wanted to make it easier to manufacture and program,, so I replaced the embedded MCU with a plug and play Arduino Pro Mini.
Also, I didn't properly test this design so just be careful with it.
It should work just fine but still...
Original projects below:
ID | Name | Designator | Footprint | Quantity | BOM_Supplier |
---|---|---|---|---|---|
1 | DC-005-5A-2.5 | 12V | DC-IN-TH_DC-005-5A-2.5 | 1 | LCSC |
2 | 10uF | C1 | C0805 | 1 | LCSC |
3 | 680uF | C2,C8,C10,C11 | CAP-TH_BD8.0-P3.50-D0.6-FD | 4 | LCSC |
4 | 22uF | C3,C5 | C0805 | 2 | LCSC |
5 | 100nF | C9,C19 | C0805 | 2 | LCSC |
6 | 10nF | C12,C13 | C0805 | 2 | LCSC |
7 | B5819W | D1,D2,D3 | SOD-123_L2.8-W1.8-LS3.7-RD | 3 | LCSC |
8 | K2-1102DP-E4SW-04 | DN_SW,UP_SW | KEY-TH_4P-L6.0-W6.0-P4.50-LS6.5 | 2 | LCSC |
9 | BSMD2920-500-16V | F1 | F2920 | 1 | LCSC |
10 | WSP4409A | Q1 | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | 1 | LCSC |
11 | IRLR8726TRPBF | Q2 | TO-252-2_L6.6-W6.1-P4.58-LS9.9-TL | 1 | LCSC |
12 | SS8050_C444722 | Q3 | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | 1 | LCSC |
13 | 10kΩ | R1,R3,R4,R5,R6 | R0805 | 5 | LCSC |
14 | 1K | R2,R9 | R0805 | 2 | LCSC |
15 | 47Ω | R7,R8 | R0805 | 2 | LCSC |
16 | 4.7kΩ | R10 | R0805 | 1 | LCSC |
17 | LMT85LP | TEMP1 | TO-92-3_L4.9-W3.7-P1.27-L | 1 | LCSC |
18 | Arduino Pro Mini V2 | U1 | ARDUINOPROMINI_ARDUINO_PRO_MINI_REV2 | 1 | Me |
19 | AMS1117-5.0_C473812 | U2 | SOT-223-3_L6.7-W3.7-P2.30-LS7.0-BR | 1 | LCSC |
Unfold
Loading...
Do you need to add this project to the album?