© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD DTMF decoder circuit
Mode:
DTMF
Open in EditorDTMF and MCU design
Open in EditorDTMF and MCU design bw
Open in EditorDTMF and MCU timer design
Open in EditorDTMF and MCU timer design bw
Open in EditorMotor Driver Circuit
Open in EditorDTMF and MCU timer design
Open in EditorDTMF and MCU timer design BW
Open in EditorDTMF and MCU timer design BW
Open in EditorDTMF and MCU timer design BW
Open in EditorDTMF and MCU design IJERT
Open in EditorID | Name | Footprint | Quantity |
---|---|---|---|
1 | 49S 4 .000MHZ | HC49US | 1 |
2 | MT8870DE | PDIP18 | 1 |
3 | 100k | AXIAL-0.3 | 2 |
4 | 1u | RAD-0.1 | 8 |
5 | 22u | RAD-0.1 | 3 |
6 | 0.1u | RAD-0.1 | 1 |
7 | NO | AXIAL-0.3 | 1 |
8 | 330KOHM | 0603-RES | 1 |
9 | LM7805 | NONE | 1 |
10 | 24v power | NONE | 1 |
11 | 0.33u | CAP-D3.0XF1.5 | 1 |
12 | 0.1u | CAP-D3.0XF1.5 | 1 |
13 | 1k | AXIAL-0.3 | 9 |
14 | ATMEGA32A-PU | DIP-40 | 1 |
15 | 16MHZ | OSC-49S-1 | 1 |
16 | 100u | RAD-0.1 | 1 |
17 | 3.570MHZ | HC49US | 1 |
18 | 100n | RAD-0.1 | 1 |
19 | L293DNE | DIP16-2.54-19.2X7.62MM | 1 |
20 | DC MOTOR | DIP | 4 |
21 | 16*2LCD | DIP28-300 | 1 |
22 | 100k | RES-ADJ_3386P | 1 |
23 | LM35 | TO-92 | 1 |
24 | PIR Motion Sensor | Grove - PIR Motion Sensor | 1 |
25 | BUZZER | BUZZER-12MM-KIT | 3 |
26 | C1815 | TO-92(TO-92-3) | 1 |
27 | 200k | AXIAL-0.3 | 1 |
28 | 10k | AXIAL-0.3 | 1 |
29 | C1815 | TO-92-DZ | 1 |
30 | LDR | DIP | 1 |
31 | 204-10UYC/S530-A3 | LED-3MM/2.54 | 1 |
32 | L293D | DIP16-2.54-19.2X7.62MM | 1 |
33 | 12 | BATTERY-1 | 1 |
34 | 5V | BATTERY-1 | 1 |
35 | Input+Enable | DIP | 1 |
36 | -DIODE | DIODE | 1 |
37 | NPN | NONE | 1 |
38 | 2k | AXIAL-0.3 | 1 |
Unfold
Loading...
Do you need to add this project to the album?