© 2022 EasyEDA Some rights reserved
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std EditionSTM32 f4 or f1 lqfp100
License: GPL 3.0
C20 is for F4 C20 = R1(0 ohm) for F1
VCCGND (pin 19) should be soldered together with GND (pin 20) for F1 VCCGND (pin 19) may be nc for F4 OR soleder it to VCC polygon under the chip
Pinout names is for stm32f407vgt6.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | AT24C08D-SSHM-T | U2 | SOIC-8_150MIL | 1 |
2 | SS110-A | D1 | SMA(DO-214AC) | 1 |
3 | TF-01A | CARD1 | TF-01A | 1 |
4 | 100nF | C2,C9,C12,C20,C21,C11,C3,C14,C15,C16,C17,C18,C1 | 0603 | 13 |
5 | 1.5K | R8 | 0603 | 1 |
6 | HEADER-2.54-P2×10 | P2 | HEADER-2.54-P2×10 | 1 |
7 | XL-0603QYGC | PWR,PB9 | LED-0603 | 2 |
8 | 20pF | C4,C5,C6,C7 | 0603 | 4 |
9 | 32.768KHz | Y1 | MC-306 | 1 |
10 | Micro USB-B 5P_C40942 | USB1 | USB-MICROB | 1 |
11 | 510 | R9,R10 | 0603 | 2 |
12 | 22 | R4,R7 | 0603 | 2 |
13 | SWD | P4 | HEADER-2.54-P4 | 1 |
14 | AMS1117-3.3 | U4 | SOT-223 | 1 |
15 | 10K | R5,R6,R21,R22,R17,R11,R12,R13,R14,R15,R16 | 0603 | 11 |
16 | 0 | R1,R23,R24,R18 | 0603 | 4 |
17 | 10uH | L1 | 0603 | 1 |
18 | K2-6639SP-C4SC-04 | RST | KEY-6.0*6.0 | 1 |
19 | 330uF | C10 | CASE-C_6032 | 1 |
20 | 100uF | C19 | 1206 | 1 |
21 | Headers Pins 2×18P 2.54mm Straight line | P3,P1 | HEADER-2.54-P2×18 | 2 |
22 | BOOT | SW1 | SWITCH-KE-2BIT/1.27_SMD | 1 |
23 | 4.7K | R20,R19,R3,R2 | 0603 | 4 |
24 | 25MHz | Y2 | SMD-5032_2P | 1 |
25 | STM32F407VGT6 | U1 | ST-LQFP100 | 1 |
Unfold