OngoingESP32-C6-WROOM C6 Mini RGB USB-C
STDESP32-C6-WROOM C6 Mini RGB USB-C
License
：CC BY-NC 4.0
Description
ESP32-C6-WROOM C6 Mini with RGB LED and USB-C compatible.
RGB LED: WS2812B Addresable rgb led.
USB-C fully reversible. 5V input for power.
One "Power" Led is connected to GPIO19.
Boot & Reset button.
Pin-headers are breadboard compatible and fully compatible with D1 mini pinout.
See PCB V1.2 for Double sided PCB design.
See PCB V2.2 for Single sided PCB design, simplier for reflow process.
V2.2 Optimisation:
- Accidental component tearing prevention (no traces pass through components pads
- All header pins are traced only on sides, again in case of tearing
- Thermal escape for GND pins
- GND copper area on all layers
Thanks to Marius (https://oshwlab.com/mariusmym) for checking the schematic and noticing an issue with the LDO.
Current design is updated to be fully working.
(Single sided PCB and Double sided PCB are updated)
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment