© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Arduino_transmitter for ELRS
License: GPL 3.0
Mode: Editors' pick
This is an Arduino based RC transmitter TX. Features:
This firmware was tested on ELRS 1.0. It is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ARDUINO_NANO_HEADERS | ARDUINONANO | ARDUINO_NANO_HEADERS | 1 |
2 | 9X5.5_BEEPER_5V | BA2 | BEEPER_HC0905F_9.5X4.0MM | 1 |
3 | 0.1u | C1 | C0603 | 1 |
4 | 100nF | C2 | C0805 | 1 |
5 | X9821WV-06-N0SN | CN1,CN2 | CONN-TH_6P-P1.25_X9821WV-06-NOSN | 2 |
6 | TERMINAL PH2.0-2P PPM | H1,H6 | PH2.0-2P | 2 |
7 | TERMINAL PH2.0-2P SW1 | H2 | PH2.0-2P | 1 |
8 | TERMINAL PH2.0-2P SW2 | H3 | PH2.0-2P | 1 |
9 | TERMINAL PH2.0-2P SW3 | H4 | PH2.0-2P | 1 |
10 | LED PH2.0-2P | H5 | PH2.0-2P | 1 |
11 | SS8050T23 | Q2 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | 1 |
12 | 20k | R1 | R0805 | 1 |
13 | 10k | R2,R3 | R0805 | 2 |
14 | 300R | R4 | R0805 | 1 |
15 | B3B-XH-A(LF)(SN) | U1,U6 | CONN-TH_3P-P2.50_B3B-XH-A-LF-SN | 2 |
16 | PH2.0-3P_C9900011646 | U2 | CONN-TH_3P-P2.00_HX20007-3A | 1 |
Unfold
Loading...
Do you need to add this project to the album?