OngoingTeensy SDR Display Audio Processor
STDTeensy SDR Display Audio Processor
License
：TAPR Open Hardware License
Description
This PCB is part of a larger project, the KeithSDR. This PCB mounts directly to the back of either the RA8875 based ER-TFTM043A2-7R, 800x480, 4.3" display or the RA8876 based ER-TFTM070-6, 1024x600, 7" display, and forms the main processor and display for a software defined radio. This board is supported with software by Mike, K7MDL on his github page.
- 3 A/B rotary A/B encoder inputs with switch
- I2C Header
- The K7MDL code currently supports I2C LCD's and DuPPa I2CEncoder V2.1.
- Hardware serial I/O header for GPS or other
- RX/TX from Teensy 4.1 Serial6, + one additional I/O pin. Could be used for GPIO
- 8 GPIO pins on 2x8 pin header
- Ethernet connector
- USB Host port connector
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment