Ongoingdactyl manuform flexible pcb
STDdactyl manuform flexible pcb
License
：Public Domain
Description
Mainly designed for the dactyl manuform with variable row curvature.
This works with the standard dactyl manuform (spacing between keys 9mm) and can adjust the spacing plus or minus 1mm (8mm to 10mm) by pulling/pushing on the pcb. Select the pcb thickness to be 0.6mm when manufacturing, lowest that you can go while retaining $2 per 5 pcbs promotional price from jlcpcb.
- Use the v4 design as it reduces the width of the pcb to better fit the narrow channels in the dactyl manuform case
- There are two types of sk6812 mini-e leds in the market. This pcb only supports one type. Make sure the pinout of your leds match those in the image below. Generally the leds from aliexpress will be the correct type.
- The wiring diagram is attached below. Ignore the yellow wires - I drew them by mistake
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment