CompletedLED Backlight retrofit
STDLED Backlight retrofit
License
：GPL 3.0
Description
Module to retrofit old CCFL backlights with LED
requires about 3.3V to 3.5V to operate, use a buck converter or hook it up to the 3.3V rail if there is one.
it can be cut after every led.
bottom is positive
top is negative
gerbers and assembly files have 3 strips that have to be seperated afterwards due to size limitations in the assembly process
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment