OngoingWLED control with ESP32
STDWLED control with ESP32
License
：Public Domain
Description
- WLED controll system by esp32 on a pcb.
- Includes Micro-USB port for powering and uploading code.
- FT232RL used as an uploader chip.
- BC850 Transistor Used for auto initiating ESP32 chip for program uploading.
- IRL2203n MOSFET used for LED control
- AMS1117 used as a 3.3V power regulator
- Includes a DC barrel jack (5mm) for powering externally.
- Includes necessary connectors for WLED project.
PCB Dimension: 59m * 63.3mm
Current Rating for MOSFET: 10A
Current Rating on logic drive: 500mA
Maximum Input Voltage (DC jack): 16V
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment