ESP32 ALED + Stepper + RGB Strip

This project was made to control Light engines for fiber optics star ceiling, it uses a ESP32 as a controller, and needs a stepper driver to control twinkle effect function.

I recommend using FDD8447L Mosfet, but any N-Channel Mosfet with a Threshold Voltage bellow 3V should work fine, use 1K Ohm 0805 SMD resistors for the gate.

If you want sound reactive use INMP441 MEMS microphone.

This design is fully open source, feel free to change it, remix it or sell.

Use at your own risk, I am not responsible if you break your device, burn your home.