OngoingCH376-DUAL-USB-ISA-V4
STDCH376-DUAL-USB-ISA-V4
License
：Public Domain
Description
CAUTION! UNTESTED – WORK IN PROGRESS – UNDER CONSTRUCTION
ATF22v10 PLCC used as a memory address & I/O port decode
Supports 28 or 32 Pin devices for ROM
CH376 Modules Both layouts that I have found so far.
Mobules plug into the bottom of the board...
Jumper Selectable
USB1
@00E0 Data & @00E4 Command
or
@02C0 Data & @02C4 Command
USB2
@00E1 Data & @00E5 Command
or
@02C1 Data & @02C5 Command
ROM
Jumper Selectable
32K @C80000-CFFFF
or
32K @D80000-DFFFF
Jumper Selectable
28Pin - 28c256 / 28c512
or
32Pin - 39f010 / 39f030 / 39f040
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment