© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD Alkaline Battery Tester
Mode:
An Alkaline battery tester based on the Artemis microcontroller. The battery is loaded by a 10 ohm resistor and the voltage under load is measured, the battery state can then be evaluated. NOTE: the I2C connections are not default, you will need to edit the board configuation file or use SparkFun's I2C port library, update will come to fix this later.
ID | Name | Designator | Footprint | Quantity | BOM_Manufacturer Part |
---|---|---|---|---|---|
1 | 1uF | C1 | C0805 | 1 | CL21B105KBFNNNE |
2 | 100nF | C2,C6,C8 | C0805 | 3 | CL21B104KCFNNNE |
3 | 10uF | C3,C10,C11 | C0805 | 3 | GRM21BR61H106KE43L |
4 | 15pF | C4,C5 | C0805 | 2 | 0805N150J201CT |
5 | 1nF | C7,C9 | C0805 | 2 | CL21B102KBCNNNC |
6 | 4.7kΩ | R1,R2 | R0805 | 2 | 0805W8F4701T5E |
7 | 0Ω | R4 | R0805 | 1 | 0805W8F0000T5E |
8 | 100kΩ | R5,R6,R7,R10 | R0805 | 4 | 0805W8F1003T5E |
9 | TS-1187A-B-A-B | SW1,SW2 | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | 2 | TS-1187A-B-A-B |
10 | SPARKFUN ARTEMIS BLE MODULE | U1 | ARTEMIS_BLE | 1 | WRL-15484 |
11 | 32.768kHz | X1 | FC-135R_L3.2-W1.5 | 1 | Q13FC1350000400 |
12 | 2460 | BT1 | KEYSTONE 2460 | 1 | 2460 |
13 | B2B-XH-A (LF)(SN) | J3,J4 | CONN-TH_B2B-XH-A-LF-SN | 2 | - |
14 | 4.7uH | L1 | IND-SMD_L5.0-W5.0_LQH5BPBXX | 1 | LQH5BPN4R7NT0L |
15 | MMBT2222A_C916372 | Q1 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | 1 | MMBT2222A |
16 | 10Ω | R8 | R2512 | 1 | 25121WJ0100T4E |
17 | 470Ω | R9 | R0805 | 1 | 0805W8F4700T5E |
18 | SSD1306 OLED DISPLAY | U2 | SSD1306 | 1 | 0.91" 128x32 OLED Display |
19 | XC9141B33CMR-G | U3 | SOT-25_L3.0-W1.6-P0.95-LS2.8-BR | 1 | XC9141B33CMR-G |
Unfold
Loading...
Do you need to add this project to the album?