OngoingTypeMatrix_STM32
STDTypeMatrix_STM32
License
：Public Domain
Description
STM32 PCB for TypeMatrix keyboard, to substitute to the default PCB. Usage: upgrade TypeMatrix to QMK firmware.
Should fit into the typematrix without any change, unless:
- 2 holes to perform on the aluminium plate (centring holes on PCB, before soldering the switches)
- unsolder / resolder the USB cable - be aware of the D- / D+ cable side (labels on PCB)
- in QMK, design the right keyboard matrix (not done yet), to affect GPIOs to the right row/col.
TO BE VERIFIED, not yet tested.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment