Arduino Nano 3.2 copy

I made this schematic for the Arduino Nano 3.2 to be as close as possible to the official schematic found [here](https://www.arduino.cc/en/uploads/Main/Arduino_Nano-Rev3.2-SCH.pdf). I chose similar components as on the official Nano. This does mean the schematic is a bit weird, as the resistors, for example, are merged into resistor arrays, meaning I had to make some jumps to the arrays. The PCB dimensions and the headers should be accurate enough to make measurements for a housing or Nano compatible board (provided as-is though), however, most measurements with component placement have been eyeballed. I also didn't map the traces, so some identical components might be swapped from their actual place on the board. I needed the schematic for a project, and thought I might as well share. To be clear, I am in no way affiliated with Arduino.