© 2022 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Std edition MX1508 motor driver module
Profile：MX1508 motor driver module
License: GPL 3.0
Description
The driver module uses the Chinese-made MX1508 chip.
It can be connected to an Arduino UNO R3 board, it can control two motors independently in both directions, in H-bridge configuration with a current of 800 mA, with a peak current of 2.5 A, it has an internal system of temperature control
For more information see [https://www.adrirobot.it/modulo-motore-mx1508/](https://www.adrirobot.it/modulo-motore-mx1508/)
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
Empty
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | Header-Female-2.54_1x2 | P1 | HDR-TH_2P-P2.54-V-M | 1 |
| 2 | MX1508 | U1 | SOP-16 | 1 |
| 3 | 220 | R1 | 0603 | 1 |
| 4 | 47u 16V | C1,C2 | CAP-D5.0XH5.5 | 2 |
| 5 | Header-Male-2.54_1x2 | H1,H2,H3,H4 | HDR-2X1/2.54 | 4 |
| 6 | BZV55 5.1V | D1 | SOD-123_L2.8-W1.8-LS3.7-RD | 1 |
Unfold
Project Members
5
7
Collect to album
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?