© 2023 EasyEDA Some rights reserved
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Arduino shield Burn the ATMEGA328P Bootloader & codes
No Profile
License: Public Domain
Description
At the center of every Arduino UNO you’ll find Microchip’s ATmega328p microcontroller.
It’s the brains of the operation, without it, your Arduino wouldn’t be able to do any of the amazing things it’s famous for.
This Arduino Uno shield will give you the oportunity to burn the ATMEGA328P bootloader.
After that, you can use an FT232RL USB/TTL converter to push codes inside the chip.
The shield can be powered by the Arduino UNO or the FT232RL converter.
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
Empty
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 20p | C1,C2 | CAP-2.5*6*7 | 2 |
| 2 | 100n | C3 | CAP-2.5*6*7 | 1 |
| 3 | USB/TTL | FTDI1 | TTL-FDTI-2.54 | 1 |
| 4 | Pin13 | LED1 | LED-5MM/2.54 | 1 |
| 5 | UNO_R3 | P1 | UNO_R3 | 1 |
| 6 | IN_VCC | P2 | HDR-3X1/2.54 | 1 |
| 7 | 10K | R2 | AXIAL-0.5 | 1 |
| 8 | 1K | R3,R4,R5 | AXIAL-0.5 | 3 |
| 9 | DIP switchEI-04 | SW1 | DIP SWITCHEI-04 | 1 |
| 10 | RESET | SW2 | SW-DIP-6X6-3PX2P-TS | 1 |
| 11 | ATMEGA328P-PU | U1 | DIP-28_300MIL | 1 |
| 12 | 16Mhz | X1 | QUARZ | 1 |
Unfold
Project Members
0
2
Collect to album
Target complaint
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?