© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD TP5000 - LiFePo4 / LiPo charging module
Mode:
This is a copy of the famous LiFePo4 / LiPo charging module which uses the TP5000. The Vin can be between 4V and 9V. So it can be used in combination with a Solar panel.
Instead of ceramic caps i used Tantalum as suggested in the datasheet. Also changed the LEDs.
This design has not been tested yet. But i am confident it will work :)
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 10uF | C1,C2,C3 | CAP-SMD_L3.2-W1.6-R-RD | 3 |
2 | 100nF | C4 | C0805 | 1 |
3 | Red LED | CHRG | LED0603-R-RD | 1 |
4 | SS34_C8678 | D1 | DO-214AC_L4.3-W2.7-LS5.3-RD | 1 |
5 | Green LED | FULL | LED0603-R-RD | 1 |
6 | Bat Select | JUMPER | 3PIN-HEADER | 1 |
7 | 4.7uH | L1 | IND-SMD_L6.0-W6.0_SLF6028T | 1 |
8 | 1K | R1 | R0603 | 1 |
9 | 0.1 | R2,R3 | R1206 | 2 |
10 | TP5000-QFN16 | U1 | QFN-16_L4.0-W4.0-P0.65-BL-EP2.2 | 1 |
Unfold
Loading...
Do you need to add this project to the album?