© 2024 EasyEDA Some rights reserved ISO/IEC
Brand new interactions and interfaces
Smooth support for design sizes of over 3W
devices or 10W pads
More rigorous design constraints, more
standardized processes
For enterprises, more professional users
Easy to use and quick to get started
The process supports design scales of 300
devices or 1000 pads
Supports simple circuit simulation
For students, teachers, creators
STD AEM Infinity 506 - Schematic
Mode:
AEM Infinity Pin Out
Open in EditorPINS 1-40
Open in EditorPINS 41-80
Open in EditorAEM Infinity Specs
Open in EditorFuse Block - Power Distribution
Open in EditorID | Name | Designator | Quantity |
---|---|---|---|
1 | COOLANT TEMP SENSOR | CTS | 1 |
2 | AIR TEMP SENSOR | ATS | 1 |
3 | OIL TEMP SENSOR | OTS | 1 |
4 | SIGNAL GROUND | SGND,SGND1 | 2 |
5 | GROUND | GND,GND1 | 2 |
6 | AEM INFINITY 1-40 | AEM1-40 | 1 |
7 | CAMSHAFT | CMS | 1 |
8 | FAN RELAY | FR | 1 |
9 | CRANKSHAFT | CRKSHT | 1 |
10 | 10A | F5 | 1 |
11 | TBD A | F4,F2 | 2 |
12 | BATTERY (12V) | V1,V2 | 2 |
13 | OIL PRESSURE SENSOR | OPS | 1 |
14 | THROTTLE POSITION SENSOR | TPS | 1 |
15 | AEM INFINITY 41-80 | AEM41-80 | 1 |
16 | MANIFOLD POSITION SENSOR | MPS | 1 |
17 | FUEL PRESSURE SENSOR | FPS | 1 |
18 | GEAR POSITION SENSOR | GPS | 1 |
19 | LAMBDA / O2 SENSOR | O2 | 1 |
20 | EFI MAIN RELAY | EFI | 1 |
21 | FUEL PUMP RELAY | FPR | 1 |
22 | FUEL PUMP | FP | 1 |
23 | 30A | F1 | 1 |
24 | 3A | F3 | 1 |
25 | IGNITION SWITCH | S1 | 1 |
26 | Main Fuse (30A) | F13 | 1 |
27 | FUSE | F12,F11,F10,F6 | 4 |
28 | Fan | F9 | 1 |
29 | Fuel Pump | F8 | 1 |
30 | Starter | F7 | 1 |
31 | O2 Sensor | F5 | 1 |
32 | AEM PERM C1-10 | F4 | 1 |
33 | Fuel Injector | F3 | 1 |
34 | Smart Coil 2 | F2 | 1 |
35 | Smart Coil 1 | F1 | 1 |
36 | BATTERY | U1 | 1 |
37 | Master Switch | SW1 | 1 |
Unfold
Loading...
Do you need to add this project to the album?