
CN3300 Boost 18V Li-Ion battery charger (IN5–9V)
STDCN3300 Boost 18V Li-Ion battery charger (IN5–9V)
License
:Public Domain
Description
This charger is designed for charging 18V Li-Ion batteries used in power tools. It is a step-up (boost) charger with a maximum charging current of 2.7–3A. The output voltage is stabilized and can be adjusted to any required level using a resistor divider.
The device is universal and suitable for charging any Li-Ion batteries up to 24V. It features automatic shut-off when fully charged and includes a charge indicator that turns off at the end of the charging process.
Input power can reach up to 65–70W. The peak efficiency of the circuit is 95%, with an average efficiency of around 85%. The maximum charging current is reached when the battery is fully discharged. As charging progresses, the current gradually decreases, reaching zero at full charge.
It operates from an input voltage as low as 5V! The recommended input voltage is 9V. Higher input voltages are also supported, but will increase the charging current, power consumption, and heat generation — therefore, not recommended.
With the addition of a 9V PD trigger, you can charge batteries using smartphone power adapters (9V) or power banks.
Full videos about this charger will be released on my YouTube channels.
https://www.youtube.com/c/akakasyan
https://www.youtube.com/@akakasyanshorts
https://www.youtube.com/@KitShop1/featured
https://www.youtube.com/c/KasyanTV
Данное зарядное устройство предназначено для зарядки 18в li-ion аккумуляторов к электроинструментам. Зарядка повышающая, максимальный ток заряда 2,7-3А. Выходное напряжение стабилизировано, можно подбором делителя сделать любое напряжение. Устройство универсальное, подходит для зарядки любых Li-Ion аккумуляторов до 24В. Автоматическое отключение при полном заряде, есть индикатор заряда, который потухает в конце процесса. Мощность на входе может доходить до 65-70Вт, наилучшее КПД схемы 95%, среднее КПД 85%. Максимальный ток заряда достигается, когда аккумулятор полностью разряжен, по мере заряда ток будет падать, в конце заряда ток равен нулю.
Работает от входного напряжения начиная от 5Вольт! Рекомендованное напряжение на входе 9В, будет работать и от более выхокого напряжения, но при этом растет ток заряда, мощность и тепловыделение, так, что не советую.
С добавлением PD триггера на 9В, можете заряжать аккумуляторы от адаптеров питания смартфонов (9В) и от повербанков
Полные видео на тему этой зарядки выйдут на моих ютуб каналах
https://www.youtube.com/c/akakasyan
https://www.youtube.com/@akakasyanshorts
https://www.youtube.com/@KitShop1/featured
https://www.youtube.com/c/KasyanTV
P.S. Видео на русском https://www.youtube.com/watch?v=G4B304ItICM
Design Drawing

BOM


Project Members

Comment