CompletedSimple Toslink Squeezlight-esp32 board
STDSimple Toslink Squeezlight-esp32 board
License
：Public Domain
Description
Little Mainboard to hold an Esp32-wrover-devkitc-v4 board.
It handles an usb-c connector and power supply for the esp32.
It also have a toslink emitter.
You can then create a little squeezlight-esp32 board.
You can easily find on aliexpress cheap aluminium enclosure where you can slide the PCB without screws (you might have to trim a little bit the PCB and the top of the toslink emitter).
You can find the opensource firmware here: https://github.com/sle118/squeezelite-esp32
I use it to stream music/webradio from a Lyrion Music Server (LMS) installed in a docker on my OMV NAS.
I have included the NVS Editor Json file that you can load to setup your board.
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment