© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD IRRIGAIA system project
License: CC-BY-NC-SA 3.0
Mode: Editors' pick
This project have an arduino MEGA, a board designed for the electronic actuation from control signal from themicrocontroler and solenoid valves to cointrol the water flux for final irrigation system. The control is a on-off system with a closed-loop topology. The feedback sensors is the moisure capacitive sensors for control.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 330 uF/16 V | C1 | CAP-TH_BD6.3-P2.50-D1.0-FD | 1 |
2 | 7805 | IC1,IC8 | 7805 | 2 |
3 | 1u | C3,C4 | CERAMIC_CAPACITOR_220NF | 2 |
4 | OPTOCOUPLER 817 COPY | IC2,IC3,IC4,IC5,IC6,IC7 | OPTO 817 [PCB] | 6 |
5 | 4.7 kΩ pull-down | R7,R8,R9,R10,R11,R12 | RESISTOR 1/2W | 6 |
6 | 330 Ω – 1/2 W | R1,R2,R3,R4,R5,R6 | RESISTOR 1/2W | 6 |
7 | Conector 8 pin | U3ARDUINO,U11SENSORES | CONECTOR 8 PIN | 2 |
8 | IRFZ34NP | Q1,Q2,Q3,Q4,Q5,Q6 | TO-220AB-3_L10.3-W5.0-P2.54-L | 6 |
9 | 2200 uF/25 V | C2 | CAPACITOR 2200 UF | 1 |
10 | Solenoid 1 | U4,U5,U6,U7,U8,U9 | CONECTOR DE 2 PINES | 6 |
11 | Arduino source | U2 | CONECTOR DE 2 PINES | 1 |
12 | Circuit source | U1 | CONECTOR DE 2 PINES | 1 |
Unfold
Loading...
Do you need to add this project to the album?