Ongoingesp32 shield V3
STDesp32 shield V3
License
：Public Domain
Description
esp32 distribution board. supports onboard 3v. zk-5ad motor driver ready, when all the wires connect to the board. ready for ev3 lego motor, with encoder ports, with pull up resistors.
2 RGB WS2812 (Neopixel) were added in this revision,
2 Push buttons for mode operation, were added.
2 Build in leds were added to the design on GPIO2 and GPIO4. these are SMD components, and are to be soldered by heat gun.
Led Matrix was added
protection diode ensures external DC voltage in not provided to esp32
Design Drawing
The preview image was not generated, please save it again in the editor.BOM
Bom empty
CloneProject Members
Intellectual Property Statement & Reproduction Instructions
This is an open-source hardware project. All intellectual property rights belong to the creator. The project is shared on the platform for learning, communication, and research only; any commercial use is prohibited. If your intellectual property rights are infringed on EasyEDA, please notify us by submitting relevant materials in accordance with the Rules for Complaints and Appeals of IPR Infringement.
Users must independently verify the circuit design and suitability when replicating this project. All risks and consequences are borne by the user, and the platform assumes no liability.
Empty
Comment